Specifications
| RIGID FINEST COLLECTION PRODUCT SPECIFICATIONS | ||||
|---|---|---|---|---|
| Product Dimensions | Overall Thickness | 6.0mm (Include IXPE Pad) | ||
| Width and Length | 9” W x 60" L (226x1535 MM) | |||
| Packaging | Per Carton | 6 Planks | 22.40 Sq.Ft. | 19.1 Kgs |
| Per Pallet | 60 Cartons | 1,344 Sq.Ft. | 1,170 Kgs | |
| Construction | Top Layers | High Definition Decor Film Ceramic Bead UV-Polyurethane Coating 20 Mil Commercial Wearlayer |
||
| Core | 3.0mm Rigid Vinyl Core + 1.05mm LVT Balance Layer Limestone Composite: min. 55% stone, 0% wood, 100% Virgin Material |
|||
| Density | ≥ 1950 kg/m³ | |||
| Pad | 1.5MM IXPE | |||
| Bevel | V-bevel | |||
| Installation | Floating Glueless Tap-Down / Unilin Click | |||
| Under Floor Heating | Approved - See installation manual for details. | |||
| Test Data | ||
|---|---|---|
| Static Load | ASTM F970-07 | Pass |
| Heat Exposure Resistance | ASTM F2199 EN16511 |
Pass |
| Swelling after Submersion | NALFA LF 01-2011 | 0.05% |
| Impact Insulation Class | ASTM E492-09 | IIC Rating = 57 |
| Sound Transmission Class | ASTM E413-16 | STC Rating = 68 |
| Fire Rating | ASTM E648/ 662 | Class I |
| Wear Resistance | NALFA LF 01-2011 | Pass Heavy Commercial |
| Residual Indentation | ASTM F1914 EN 16511 |
Pass |
| Impact Resistance (Big Ball) | NALFA LF01-2011 EN 16511 |
Pass |
| Impact Resistance (Small Ball) | NALFA LF01-2011 EN 16511 |
Pass |
| Slip Resistance | ASTM C1028 | Dry: 0.55, Wet: 0.51 Pass, Meets ADA |
| Resistance to Staining | ASTM F925 NALFA LF01-2011 |
Pass |
| Chemical Composition | ||
|---|---|---|
| Ortho-phthalates | Prop 65 | Not Detected / In Compliance |
| Lead | CPSIA | None Detected |
| Substances of Very High Concern (SVHC) (Mercury, Chromium VI, Cadmium, SCCp, Benzene, Xylene, Tributyltin, etc.) |
Not Detected / REACH Compliant | |
| Certification | Description | Details |
|---|---|---|
 |
Floor Score recognized by SCS Global Services | Indoor Air Quality Certified to SCS-EC10.3-2014 v4.0 Conforms to the CDPH/EHLB Standard Method v1.2-2017 for the school classroom and private office parameters when modeled as Flooring. Measured Concentration of Total Volatile Organic Compounds (TVOC): Less than/equal to 0.5 mg/m³ |
 |
CE Certificate recognized by Center for Textile Science and Engineering | Comply with the technical requirements referenced in EN 14041, EN 13501-1, EN 717-1 and EN 13893 |
 |
UKCA Certificate recognized by UTTG | Comply with the technical requirements referenced in BS EN ISO 11925-2:2020, BS EN 13501-1:2018, BS EN 13238:2010, BS EN 13893 |
 |
Assure recognized by SCS Global Services | ASSURE CERTIFIED™ guarantees that this rigid core flooring product has been manufactured to the highest standards and meets all the ASSURE CERTIFIED™ requirements for indoor air quality, rigorous performance, and low heavy metals & ortho-phthalates content. |
Specifications
| LUXURY CHOICE COLLECTION PRODUCT SPECIFICATIONS | |||
|---|---|---|---|
| Product | Overall Thickness: | 2.5MM | |
| Width and Length: | 9" X 60" X 2.5mm (228.6mm X 1524mm X 2.5mm) | ||
| Packaging | Per Carton | 12 Planks, 45 sq.ft., 20.4 kgs. | |
| Per Pallet | 60 Cartons, 2,700 sq.ft., 1245 kgs. | ||
| Construction | Top Layers | High Definition Decor Film, Ceramic Bead UV-Polyurethane Coating, 22Mil Wear Layer | |
| Core | 2.5mm Vinyl Composite: 0% wood, 100% Virgin Material | ||
| Density | ≥ 1950 kg/m3 | ||
| Pad | Not Recommended | ||
| Bevel | Micro Bevel | ||
| Installation | Glue Down | ||
| Under Floor Heating | Approved - Water Heat System | ||
| S/N | Performance / Properties | Test Method | Criteria |
|---|---|---|---|
| A. Dimensions and Dimension Tolerance | |||
| 1 | Tile side length | ISO 24342 or EN 427 | ≤0.15% of nominal length up to 0.5mm maximum |
| 2 | Tile square-ness | ISO 24342 or EN 427 | Permissible deviation For ≤ 400mm : ≤0.25mm For > 400mm : ≤0.35mm |
| 3 | Overall thickness | ISO 24346 or EN 428 | Average value should be nominal value with a tolerance of -0.10/+0.13 mm. Individual results should be average value ± 0.15mm. |
| 4 | Thickness of wear layer | ISO 24340 or EN 429 | Average value should be nominal value with a tolerance of -0.10/+0.13% but not more than 0.1mm. Individual values should not vary more than 0.05mm or 15% below the average, whichever is greater. |
| 5 | Total mass per unit area | ISO 23997 or EN 430 | Average value (g/m²) should be nominal value with a tolerance of -10% / +13%. |
| B. Physical Properties | |||
| 1 | Dimensional stability after exposure to heat | ISO 23999 or EN 434 | ≤ 0.25% |
| 2 | Curling after exposure to heat | ISO 23999 or EN 434 | ≤ 2mm |
| 3 | Residual indentation | ISO 24343-1 Part 1 or EN 433 | ≤ 0.1mm |
| 4 | Effect of castor chair | ISO 4918 or EN 425 | After 25,000 cycles, no delamination shall occur. No disturbance to the surface other than a slight change in appearance Type W; Only minor changes in surface, no delamination |
| 5 | Abrasion resistance | EN 660 Part 1 & 2 | Wear Group T Volume loss F≤ 2.0mm³ |
| 6 | Slip resistance | SS 485 (Dry floor friction test) | Coefficient of friction ≥ 0.4 |
| SS485 (Wet condition - pendulum friction test) | Classification X minimum | ||
| C. Chemical Properties | |||
| 1 | Color fastness to artificial light | ISO 105-B02 or ASTM F1515 | Grade 6 minimum ∆E ≤ 8 after 300 hr where E is irradiance in W/m² |
| 2 | Stain & Chemical resistance | ISO 26987 or EN 423 | Achieve Class 0 – no change, when tested with common household stains and chemicals (e.g., Olive oil, Coffee, Vinegar, Wine, Household ammonia, Household bleach) for contact duration of 2 hours |
| D. Fire Performance | |||
| 1 | Toxicity | BS 6853 Annex B | Achieve R < 1.0 |
| 2 | Smoke Production | EN 13501-1 / EN 9239-1 | Achieve S1 |
| 3 | Flame spread/ignition | EN 13501-1 / EN 11925-2 | Achieve B fl |
| 4 | Cigarette burn resistance | EN 1399 | Class 3 minimum |
| E. Other Criteria | |||
|
Floor Score recognized by SCS Global Services | Indoor Air Quality Certified to SCS-EC10.3-2014 v4.0 Conforms to the CDPH/EHLB Standard Method v1.2-2017 for the school classroom and private office parameters when modeled as Flooring. Measured Concentration of Total Volatile Organic Compounds (TVOC): Less than/equal to 0.5 mg/m³ |
|
|
CE Certificate recognized by Center for Textile Science and Engineering | Comply with the technical requirements referenced in EN 14041, EN 13501-1, EN 717-1, and EN 13893 | |
|
UKCA Certificate recognized by UTTG | Comply with the technical requirements referenced in BS EN ISO 11925‐2:2020, BS EN 13501‐1:2018, BS EN 13238:2010, and BS EN 13893 | |
Warranty
| Thickness | Wear Layer | Attached Pad | Limited Residential Warranty | Limited Light Commercial Warranty | |
|---|---|---|---|---|---|
| Rigid finest | 6.0mm | 20 mils | Yes | 25-Years | 10-Years |
| Luxury Choice | 2.5mm | 22 mils | No | 25-years | 10-years |
WARRANTIES
Joint Integrity
Luxury Layer warrants that during the period of the warranty, the Uniclic brand locking system contained in Rigid Finest Flooring will not fail.
Manufacturing Defect
Luxury Layer warrants that during the period of the warranty, Rigid Finest & Luxury Choice Flooring will be free from manufacturing defects.
All Pet
Luxury Layer warrants that during the period of the warranty Rigid Finest & Luxury Choice Flooring will resist stains from all domestic pets, including vomit, urine, or feces. “Stain resistance” is the ability of your floor to resist permanent stains.
Waterproof
Luxury Layer warrants that during the period of the warranty, Rigid Finest Flooring is 100% waterproof, and the structural integrity of the floor will not be significantly diminished by exposure to water.
Wear Resistance
Luxury Layer warrants that during the period of the warranty, Rigid Finest & Luxury Choice Flooring wear layer will not wear through the design layer
Obligations of Owner:
Owner must submit notice of all claims under these warranties to Luxury Layer within the specified warranty period. Claims must be submitted in writing. Rigid Finest & Luxury Choice Flooring are warranted as indicated above in continuous climate controlled interior environments.
The following general terms and conditions apply. If you have questions regarding the warranty information, please contact us.
- These warranties apply to Rigid Finest & Luxury Choice Flooring when installed and maintained in accordance with our most recent installation and maintenance procedures. The original owner agrees to provide proof of compliance with recommended installation and maintenance procedures when a claim is filed.
- These warranties apply only to the original owner and the first installation of the product and are non-transferable. The “original owner” is the person stated as the buyer on the purchase invoice.
General Terms and Conditions for Rigid Finest:
- Luxury Layer will, at its option, repair or replace products not meeting the above listed warranties. When replacement of the flooring is made, only new material from the current product range at the time of the claim will be. There will be no other form of compensation. Responsibility under this warranty only applies to hidden defects that were not visible before or during the installation of the Rigid Finest & Luxury Choice Flooring. Material installed with visible defects is considered accepted.
- Open joints of 0.01 inches (0.2mm) or less are not considered a defect under the joint integrity warranty. Joints compromised by improper installation, lack of continuous climate control, or obstructions creating pinch points are specifically excluded by this warranty.
- These warranties do not apply to Rigid Finest & Luxury Choice Flooring that has been subject to abnormal use or conditions or abused in any way. “Abnormal use or conditions” includes, but is not limited to, damage from plumbing/appliance leaks, storm or flood; damage from smoke, fire or other casualty events; damage caused by negligence or improper alterations of the original manufactured product. “Abuse” is any use of the flooring that is unreasonable considering the normal and expected uses of Rigid Finest & Luxury Choice Flooring in a residential or commercial environment. The feet of furniture must always be covered with appropriate protective material. Chairs, sofas or furniture with castors must be fitted with soft rubber wheels and have an adequate protective mat or protective castor cups.
- The waterproof warranty excludes damage to furniture, fixtures, walls, subfloors, moldings, trims, underlayments, radiant heating elements or anything not related to the Rigid Finest Flooring. Also, any damage resulting from mold and mildew growth is not covered under these warranties.
- For the All Pet Warranty to remain in effect, clean any affected area immediately. Any staining resulting from urine, feces or vomit from anything other than a domestic pet is not covered under this warranty.
- Walk off mats must be placed at all exterior entrances to protect Rigid Finest & Luxury Choice Flooring from soil, grit, deicers, asphalt sealers, and other contaminants capable of damaging Rigid Finest & Luxury Choice Flooring. Suitable walk off mats should contain both soft and firm fibers to facilitate removal of wet or solid contaminants from shoe soles. An extra set of walk off mats should be available for each entrance so walk off mats can be replaced and cleaned weekly during routine maintenance or more often depending upon site and weather conditions. This will prevent walk off mats from becoming the source of tracked-on contaminants. Walk off mats should be large enough to allow adequate soil removal.
General Terms and Conditions for Rigid Finest & Luxury Choice Flooring
- These warranties do not apply to damage from exposure to extreme heat or sunlight exposure, dryness, or stains resulting of chemical or industrial products (other than recommended cleaning products). Windows coverings should be used during periods of intense sunlight to avoid intense heating of flooring product.
- These warranties exclude damage caused by hydrostatic pressure (water or moisture under the floor that is transmitted to the surface through exerted pressure) or other conditions that result in water or moisture below the floor.
- Material must be checked carefully for defects before and during installation and under sufficient lighting. Products with visible defects must not be installed under any circumstances. The retailer must be informed in writing of such defects within 15 days. After this time has elapsed, no further claims will be accepted. Color and gloss issues resulting from material added to an existing installation at a later date and non-warranty related repairs are excluded from coverage.
- ALL IMPLIED WARRANTIES WHICH MAY ARISE BY IMPLICATION OF LAW OR APPLICATION OF COURSE OF DEALING OR USAGE OF TRADE—INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE—ARE EXPRESSLY EXCLUDED. NO WARRANTIES, EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, EXTEND BEYOND THOSE EXPRESSLY SET FORTH IN THIS WARRANTY BROCHURE, AND ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED. By implied warranties Luxury Layer means warranties that the law presumes to have been given by the seller even though they are not set out in writing.
PLEASE NOTE: Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts,